Electro-Mechanical Control Systems

Electro-Mechanical Control Systems

Project description
Using a top down approach<br />
· Analyse with the use of a system diagram the process. <br />
<br />
· Define the inputs and outputs required for a control system. <br />
<br />
· Develop a suitable PLC or other electrical control circuit to<br />
control the above with where all end conditions are fed back<br />
using limit switches and the inject forward and mould close<br />
has a timer control. <br />
<br />
· Devise a pneumatic circuit to complete the above operation. <br />
(Fluidsim may be used for this)<br />
<br />
· Advise how speed control on all linear actuators would be <br />
achieved.<br />
<br />
I will insert a Question in.<br />
—<br />
Referencing Requirements:<br />
A simple small moulding machine has three pneumatic linear actuators<br />
1. Linear actuator opening and closing the mould<br />
2. Linear actuator moving the barrel forward against the mould and<br />
back away from the mould<br />
3. Linear actuator moving forward injecting polymer and returning<br />
(refilling for the next shot).

PLACE THIS ORDER OR A SIMILAR ORDER WITH US TODAY AND GET AN AMAZING DISCOUNT 🙂

 

 

 

© 2020 customphdthesis.com. All Rights Reserved. | Disclaimer: for assistance purposes only. These custom papers should be used with proper reference.